Hyperion Entertainment Message Boards

Support Forum
https://forum-quelle.hyperion-entertainment.com/

New kernels

https://forum-quelle.hyperion-entertainment.com/viewtopic.php?t=4738

Page 166 of 166

Re: New kernels

Posted: Sun May 24, 2026 7:02 pm
by sailorMH
kernel 5.10.256 working on X1000:
Image

Re: New kernels

Posted: Sun May 24, 2026 7:48 pm
by sailorMH
kernel 6.12.90 also OK

Image

Re: New kernels

Posted: Mon May 25, 2026 11:01 am
by xeno74
sailorMH wrote: Sun May 24, 2026 5:12 pm Kernel 7.1-rc4 works with my Debian 12 on X1000
sailorMH wrote: Sun May 24, 2026 7:02 pm kernel 5.10.256 working on X1000
sailorMH wrote: Sun May 24, 2026 7:48 pm kernel 6.12.90 also OK
Great! Many thanks for testing! :-) Have a nice weekend. :-)

Re: New kernels

Posted: Mon May 25, 2026 2:23 pm
by xeno74
New for the RC5 of kernel 7.1:

Re: New kernels

Posted: Mon May 25, 2026 6:02 pm
by Hypex
xeno74 wrote: Fri May 15, 2026 8:20 am I don’t have these issues on my X1000. I successfully tested HD-audio, USB-audio and the Creative Soundblaster LIVE Player 1024 (EMU10K1) with the RC3 of kernel 7.1, with the stable kernel 7.0.6 and with the stable long-term kernel 6.12.84 on my X1000 and X5000 today
I've done some more testing. I tested 5.10.256 with Precise, 6.12.84 to 6.12.90 with Xenial and 7.0.6 as well as all 7.1 kernels up to RC4 with MATE. All booted up fine as expected but all unable to setup sound. I only have onboard audio connected through green jack.

To compare I will list output for versions you tested.


X1000 with the RC3 of kernel 7.1:

Code: Select all

[   27.766328] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[   27.766470] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[   27.786375] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops 0xc00000000197c340)
[   27.793518] snd_hda_codec_idt hdaudioC1D3: STAC92HD700: picked fixup  for PCI SSID 1888:1000
[   27.793655] snd_hda_intel 0000:05:14.2: spurious response 0x173f:0x3, last cmd=0x30af000c
[   27.818665] snd_hda_intel 0000:05:14.2: spurious response 0x173f:0x3, last cmd=0x30bf000c
[   28.845795] snd_hda_intel 0000:05:14.2: azx_get_response timeout, switching to polling mode: last cmd=0x30cf000c
[   29.846805] snd_hda_intel 0000:05:14.2: azx_get_response timeout, switching to single_cmd mode: last cmd=0x30cf000c
[   29.875512] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   29.875528] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   29.875538] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   29.875547] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[   29.875554] snd_hda_codec_idt hdaudioC1D3:    dig-out=0x21/0x0
[   29.875562] snd_hda_codec_idt hdaudioC1D3:    inputs:
[   29.875569] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[   29.875578] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[   29.875585] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[   29.875593] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[   29.876970] snd_hda_codec_idt hdaudioC1D3: rates == 0 (nid=0x8, val=0x0, ovrd=0)
[   29.900564] snd_hda_codec_idt hdaudioC1D3: fail to setup default for PCM STAC92HD700 Alt Analog
[   29.900603] snd_hda_codec_idt hdaudioC1D3: probe with driver snd_hda_codec_idt failed with error -5
[   29.931089] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   29.931109] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   29.931119] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   29.931128] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[   29.931135] snd_hda_codec_idt hdaudioC1D3:    dig-out=0x21/0x0
[   29.931143] snd_hda_codec_idt hdaudioC1D3:    inputs:
[   29.931151] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[   29.931159] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[   29.931166] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[   29.931173] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[   29.931911] snd_hda_codec_idt hdaudioC1D3: rates == 0 (nid=0x7, val=0x0, ovrd=0)
[   29.955519] snd_hda_codec_idt hdaudioC1D3: fail to setup default for PCM STAC92HD700 Analog
[   29.955556] snd_hda_codec_idt hdaudioC1D3: probe with driver snd_hda_codec_idt failed with error -5
[   29.991890] snd_hda_codec_generic hdaudioC1D3: ignore pin 0xe with mismatching assoc# 0x4 vs 0x1
[   29.992115] snd_hda_codec_generic hdaudioC1D3: autoconfig for Generic: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   29.992127] snd_hda_codec_generic hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   29.992137] snd_hda_codec_generic hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   29.992146] snd_hda_codec_generic hdaudioC1D3:    mono: mono_out=0x0
[   29.992153] snd_hda_codec_generic hdaudioC1D3:    dig-out=0x21/0x0
[   29.992161] snd_hda_codec_generic hdaudioC1D3:    inputs:
[   29.992168] snd_hda_codec_generic hdaudioC1D3:      Mic=0xb
[   29.992176] snd_hda_codec_generic hdaudioC1D3:      Mic=0xc
[   29.992183] snd_hda_codec_generic hdaudioC1D3:    dig-in=0x22
[   29.993535] snd_hda_codec_generic hdaudioC1D3: formats == 0 (nid=0x7, val=0x1, ovrd=0, streams=0x1d0541)
[   30.019557] snd_hda_codec_generic hdaudioC1D3: fail to setup default for PCM Generic Analog
[   30.019596] snd_hda_codec_generic hdaudioC1D3: probe with driver snd_hda_codec_generic failed with error -5
[   30.045227] snd_hda_intel 0000:05:14.2: Cannot probe codecs, giving up
X1000 with the stable long-term kernel 6.12.84:

Code: Select all

[   24.884070] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[   24.884199] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[   24.932098] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops 0xc0000000016cd278)
[   25.915488] snd_hda_intel 0000:05:14.2: azx_get_response timeout, switching to polling mode: last cmd=0x30570500
[   26.916474] snd_hda_intel 0000:05:14.2: azx_get_response timeout, switching to single_cmd mode: last cmd=0x30570500
[   26.964384] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   26.964401] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.964410] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   26.964418] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[   26.964424] snd_hda_codec_idt hdaudioC1D3:    dig-out=0x21/0x0
[   26.964430] snd_hda_codec_idt hdaudioC1D3:    inputs:
[   26.964435] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[   26.964441] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[   26.964447] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[   26.964453] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[   26.965002] snd_hda_codec_idt hdaudioC1D3: invalid dep_range_val 0:1
[   26.966110] snd_hda_codec_idt hdaudioC1D3: rates == 0 (nid=0x7, val=0x0, ovrd=0)
[   26.966119] snd_hda_codec_idt hdaudioC1D3: fail to setup default for PCM STAC92HD700 Analog
[   26.966145] snd_hda_codec_idt hdaudioC1D3: probe with driver snd_hda_codec_idt failed with error -5
[   26.973257] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   26.973273] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.973282] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   26.973290] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[   26.973295] snd_hda_codec_idt hdaudioC1D3:    dig-out=0x21/0x0
[   26.973301] snd_hda_codec_idt hdaudioC1D3:    inputs:
[   26.973306] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[   26.973312] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[   26.973318] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[   26.973323] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[   26.974134] snd_hda_codec_idt hdaudioC1D3: formats == 0 (nid=0x2, val=0x400301, ovrd=0, streams=0x400301)
[   26.974145] snd_hda_codec_idt hdaudioC1D3: fail to setup default for PCM STAC92HD700 Analog
[   26.974166] snd_hda_codec_idt hdaudioC1D3: probe with driver snd_hda_codec_idt failed with error -5
[   26.984443] snd_hda_codec_generic hdaudioC1D3: ignore pin 0xe with mismatching assoc# 0x4 vs 0x1
[   26.984714] snd_hda_codec_generic hdaudioC1D3: autoconfig for Generic: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   26.984726] snd_hda_codec_generic hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.984735] snd_hda_codec_generic hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   26.984743] snd_hda_codec_generic hdaudioC1D3:    mono: mono_out=0x0
[   26.984748] snd_hda_codec_generic hdaudioC1D3:    dig-out=0x21/0x0
[   26.984754] snd_hda_codec_generic hdaudioC1D3:    inputs:
[   26.984760] snd_hda_codec_generic hdaudioC1D3:      Mic=0xb
[   26.984766] snd_hda_codec_generic hdaudioC1D3:      Mic=0xc
[   26.985587] snd_hda_codec_generic hdaudioC1D3: rates == 0 (nid=0x2, val=0x0, ovrd=0)
[   26.985597] snd_hda_codec_generic hdaudioC1D3: fail to setup default for PCM Generic Analog
[   26.985617] snd_hda_codec_generic hdaudioC1D3: probe with driver snd_hda_codec_generic failed with error -5
[   26.985637] snd_hda_intel 0000:05:14.2: Cannot probe codecs, giving up
X1000 with the stable kernel 7.0.6:

Code: Select all

[   30.401657] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[   30.419548] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[   30.489909] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops 0xc00000000199b570)
[   31.431467] snd_hda_intel 0000:05:14.2: azx_get_response timeout, switching to polling mode: last cmd=0x30870500
[   32.432459] snd_hda_intel 0000:05:14.2: azx_get_response timeout, switching to single_cmd mode: last cmd=0x30870500
[   32.618861] snd_hda_codec_idt hdaudioC1D3: STAC92HD700: picked fixup  for PCI SSID 1888:1000
[   32.619321] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   32.619333] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.619342] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   32.619351] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[   32.619358] snd_hda_codec_idt hdaudioC1D3:    inputs:
[   32.619365] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[   32.619373] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[   32.619380] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[   32.619387] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[   32.620776] snd_hda_codec_idt hdaudioC1D3: formats == 0 (nid=0x2, val=0xe07e0, ovrd=1, streams=0xe07e0)
[   32.644717] snd_hda_codec_idt hdaudioC1D3: fail to setup default for PCM STAC92HD700 Analog
[   32.644753] snd_hda_codec_idt hdaudioC1D3: probe with driver snd_hda_codec_idt failed with error -5
[   32.736824] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   32.736847] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.736857] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   32.736866] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[   32.736873] snd_hda_codec_idt hdaudioC1D3:    dig-out=0x21/0x0
[   32.736880] snd_hda_codec_idt hdaudioC1D3:    inputs:
[   32.736888] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[   32.736895] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[   32.736902] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[   32.736909] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[   32.738152] snd_hda_codec_idt hdaudioC1D3: formats == 0 (nid=0x7, val=0x400301, ovrd=0, streams=0x400301)
[   32.763556] snd_hda_codec_idt hdaudioC1D3: fail to setup default for PCM STAC92HD700 Analog
[   32.763594] snd_hda_codec_idt hdaudioC1D3: probe with driver snd_hda_codec_idt failed with error -5
[   32.884010] snd_hda_codec_generic hdaudioC1D3: ignore pin 0xe with mismatching assoc# 0x4 vs 0x1
[   32.884233] snd_hda_codec_generic hdaudioC1D3: autoconfig for Generic: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   32.884245] snd_hda_codec_generic hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.884255] snd_hda_codec_generic hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   32.884264] snd_hda_codec_generic hdaudioC1D3:    mono: mono_out=0x0
[   32.884271] snd_hda_codec_generic hdaudioC1D3:    dig-out=0x21/0x0
[   32.884278] snd_hda_codec_generic hdaudioC1D3:    inputs:
[   32.884286] snd_hda_codec_generic hdaudioC1D3:      Mic=0xb
[   32.884293] snd_hda_codec_generic hdaudioC1D3:      Mic=0xc
[   32.884300] snd_hda_codec_generic hdaudioC1D3:    dig-in=0x22
[   32.885819] snd_hda_codec_generic hdaudioC1D3: formats == 0 (nid=0x7, val=0x5, ovrd=0, streams=0x1d0541)
[   32.910630] snd_hda_codec_generic hdaudioC1D3: fail to setup default for PCM Generic Analog
[   32.910669] snd_hda_codec_generic hdaudioC1D3: probe with driver snd_hda_codec_generic failed with error -5
[   32.945033] snd_hda_intel 0000:05:14.2: Cannot probe codecs, giving up

I'm starting to suspect my X1000 may have a fault on the audio output. For years I've heard this static noise, but at the time I had installed USB powered speakers, when I replaced my monitor with a speaker-less screen. So I thought it may have been interference. But I've since replaced that monitor with a Dell screen with a sound bar.

I tested OS4 since there the audio has always worked, despite the static. The boot sound played along with static. I'm so used to this it's almost normal to me. However, after boot AHI could not play any test sounds. Well, it was playing on the hardware, but no sound was coming out of the speakers. It hasn't got that bad before.

The X1000 is an old board by now, so it's possible my solder joints have deteriorated, or sound circuit developed some other fault. Even though I would consider it to be in good condition and avoid taking it out with me that won't stop time taking its toll. The easiest solution would be to install a sound card if this is the case. I'd be slightly disappointed, as I like using the integrated Nemo sound, since it has worked well over the years. :-)

:?:

Re: New kernels

Posted: Wed May 27, 2026 10:10 am
by xeno74
Hypex wrote: Mon May 25, 2026 6:02 pm The X1000 is an old board by now, so it's possible my solder joints have deteriorated, or sound circuit developed some other fault.
Yes, the Nemo board is old. I hope, your board isn’t broken.

Re: New kernels

Posted: Wed May 27, 2026 10:16 am
by xeno74
Hi All,

I have released the RC5 of kernel 7.1 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).

Download and further information: github.com

Image

Please test the kernels.

Thanks,
Christian

Re: New kernels

Posted: Wed May 27, 2026 3:55 pm
by Hypex
xeno74 wrote: Wed May 27, 2026 10:10 am Yes, the Nemo board is old. I hope, your board isn’t broken.
So do I. I'll need to investigate further. I checked the most obvious item, the plug, which I've pressed fully in. I may get out some other speakers to test. It could have been going faulty for some time for whatever reason. OS4 can still find the hardware and play on it, but on Linux it fails to set up analogue output. Thinking of to search if this is a known issue.
All times are UTC+02:00
Page 166 of 166

Powered by phpBB® Forum Software © phpBB Limited